CPU |
1.
Ryzen Threadripper PRO 3000WX (up to 64C) |
|
2.
Single sWRX8 4094 socket; CPU TDP supports up to
280W |
Chipset |
1.
AMD WRX80 Chipset |
Memory |
1.
8 x DDR4 DIMM slots supports |
|
2.
8 channels memory architecture (1 DIMM per
channel) |
|
3.
Support up to DDR4 3200/2933/2600 MHz |
|
4.
Support for UDIMM (ECC), RDIMM, 3DS RDIMM and LRDIMM memory
modules |
|
5.
Support system memory capacity up to 1024GB |
Audio |
1.
Realtek ALC1220-VB codec |
|
2.
High Definition Audio |
|
3.
2/4/5.1/7.1-channel |
|
4.
Support for S/PDIF Out |
LAN |
1.
Dual Intel X550 10GbE LAN |
|
2.
Dual Intel i210AT GbE LAN (NCSI MLAN) |
Expansion
Slots |
(Slot7)
PCIe x16 (running at Gen4 x16) |
|
(Slot6)
PCIe x16 (running at Gen4 x16) |
|
(Slot5)
PCIe x16 (running at Gen4 x16) |
|
(Slot4)
PCIe x16 (running at Gen4 x16) |
|
(Slot3)
PCIe x16 (running at Gen4 x16) |
|
(Slot2)
PCIe x16 (running at Gen4 x8) |
|
(Slot1)
PCIe x16 (running at Gen4 x16) |
Storage
Interface |
1.
4 x SATA 6Gb/s connectors (support software RAID 0; RAID1; RAID5;
RAID10) |
|
2.
2 x M.2 Connectors (Socket 3; M key; Form Factor 2242/2280 ; Supports PCIe
gen4 x4 or SATA mode) |
|
3.
2 x slimSAS (PCIe gen4 x4 or 4x SATAIII) + 1 x slimSAS (PCIe gen4 x4)
connectors |
USB |
1.
1 x USB Type-C port on the back panel, with USB 3.2 Gen 2
support |
|
2.
5 x USB 3.2 Gen 2 Type-A ports (red) on the back
panel |
|
3.
1 x USB Type-C header onboard, with USB3.2 Gen2
support |
|
4.
2 x USB 3.2 Gen 1 header onboard |
|
5.
1 x USB 3.2 Gen 1 vertical connector onboard |
|
6.
1 x USB 2.0 header on board |
Internal
I/O Connectors |
1.
1 x 24-pin ATX main power connector |
|
2.
1 x 8-pin ATX 12V CPU power connector |
|
3.
1 x 8-pin ATX 12V GPU power connector |
|
4.
1 x CPU fan header |
|
5.
6 x system fan headers |
|
6.
4 x SATA 6Gb/s connectors |
|
7.
2 x M.2 Socket 3 connectors |
|
8.
3 x slimSAS connectors |
|
9.
1 x front panel header |
|
10.
1 x front panel audio header |
|
11.
1 x USB Type-C header, with USB 3.2 Gen 2
support |
|
12.
1 x USB 3.2 Gen 1 vertical connector |
|
13.
2 x USB 3.2 Gen 1 header |
|
14.
1 x USB 2.0 header |
|
15.
1 x Thunderbolt add-in card connector |
|
16.
1 x Trusted Platform Module(TPM) header (2x6 pin, for the GC-TPM2.0_S
module only) |
|
17.
1 x serial port header |
|
18.
1 x chassis intrusion header |
|
19.
1 x Clear CMOS jumper |
|
20.
2 x SATA SGPIO headers |
|
21.
1 x BMC_VGA jumper |
|
22.
1 x BMC_WATCHD jumper |
|
23.
1 x SMB_IPMB connector |
|
24.
1 x PMBUS header |
|
25.
1 x Speaker |
Back
Panel Connectors |
1.
1 x D-sub port |
|
2.
1 x serial port |
|
3.
1 x USB 3.2 Gen 2 Type-C port (red) |
|
4.
5 x USB 3.2 Gen 2 Type-A port (red) |
|
5.
2 x GbE RJ-45 ports |
|
6.
2 x 10GbE RJ-45 ports |
|
7.
1 x optical S/PDIF Out connector |
|
8.
5 x audio jacks |
I/O
Controller |
1.
ASPEED AST2500 BMC chip |
H/W
Monitoring |
1.
Voltage detection |
|
2.
Temperature detection |
|
3.
Fan speed detection |
|
4.
Fan speed control |
|
*
Whether the fan speed control function is supported will depend on the fan
you install. |
Operating
Properties |
1.
Operating temperature: 10C to 40C |
|
2.
Operating humidity: 8 - 80% |
|
3.
Non-operating temperature: -40C to 70C |
|
4.
Non-operating humidity: 5% - 95% |
Form
Factor |
1.
CEB Form Factor; 30.5cm x 26.7cm |
Support
OS |
1.
Windows 10 |
|
2.
Linux |