IMG 1 of 1
Our Price:
$64.90
or quickly purchase this product
Backorder

Part Number:
498582
(?) Brand:
Manuf No:
USB2312C
Shipping Weight:
0.18 KG (Includes product packaging)
Estimate Shipping
Date Added:

Enter email address to be notified when this item is available again

All stock codes associated to this product
USB2312C, IDSUNUSB2312C, IDSUN-USB2312C, 4715109710991

Sunix USB 3.1 Enhanced SuperSpeed+ 10G 2 ports PCI Express Host Card with Type-C Receptacle

 

Overview

  • PCI Express Base Specification Revision 2.0 & 3.0 Dual-lane ( x2) .
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) Ver.1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, 2.0 and 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands dual external USB 3.1 Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 1500mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
  • Green Product meets RoHS standard and Low Power consumption.

Specifications

Hardware

BUS

PCI Express Revision 2.0 & 3.0, Dual-Lane (x2)

Controller

PCI Express USB 3.1 Host controller, Asmedia ASM3142

USB Standard

eXtensible Host Controller Interface (xHCI) Rev1.1

IRQ & IO

Assigned by System

USB Communication

Interface

Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1

Speed

SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)

No. of Port

2-port

PCB Connector

USB 3.1 USB Type-C port (Downstream Facing Port)

Protection

15KV IEC61000-4-2 Air Gap Discharge

4KV IEC61000-4-2 Contact Discharge

Power

Source

PCI Express bus power

Output Capacity

USB Type-C Port : +5VDC / 1.5A

Note:

* USB Power Delivery Protocol does NOT support.

* Built-in over current protection on each USB port.

* Maximum total power output depends on the capacity of users power supply unit

Power Consumption

1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows

Windows 7 (X86/X64)

Windows 8.x / 10 (X86/X64) (Windows in-box driver)

Linux

Linux 4.6 or later

Environment

Operation Temperature

0 to 60C (32 to 140F)

Operation Humidity

5 to 95% RH

Storage Temperature

-20 to 70C (-4 to 158F)

Regulatory Approvals

EMC

CE, FCC, VCCI, BSMI

Green

RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension

80 x 68.5 mm

Bracket

Standard 120 mm (Low Profile 80mm)

Bracket Space

1

No additional files, specification sheets, guides or documentation found for product.

Warranty: 12 Month Return To Base

Full manufacturers warranty details are available at the manufacturers web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 6 | TM: 14 | LM: 35 | TY: 255 | T: 2803
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.