| Ports | 48 x 10/100/1000 (UPOE) |
| Power | AC 120/230 V (50 - 60 Hz) |
| Weight | 7.72 kg |
| Subtype | Gigabit Ethernet |
| Capacity | IPv4 routing table entries: 64000 ? IPv6 routing table entries: 32000 ? Flexible NetFlow entries: 128000 ? VLAN IDs: 4000 ? Switched virtual interfaces (SVIs): 1000 ? Packet buffer size: 32 MB |
| Features | Trunking, full duplex mode, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, FTP client, 3 fans, Control plane protection (CoPP), Source-Specific Multicast (SSM), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Private VLAN |
| PoE Budget | 822 W |
| Device Type | Switch - 48 ports - L3 - Managed - stackable |
| Performance | Switching capacity: 256 Gbps ? Stacking bandwidth: 480 Gbps ? Switching capacity with stacking: 736 Gbps ? Forwarding rate: 190.48 Mpps ? Forwarding rate with stacking: 547.62 Mpps |
| Enclosure Type | Rack-mountable 1U |
| Power Redundancy | Optional |
| Routing Protocol | OSPF, IS-IS, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng |
| Dimensions (WxDxH) | 44.5 cm x 48.8 cm x 4.4 cm |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
| Jumbo Frame Support | 9198 bytes |
| Product Description | Cisco Catalyst 9300 (Higher Scale) - Network Essentials - switch - 48 ports - Managed - rack-mountable |
| Manufacturer Warranty | Limited lifetime warranty |
| MAC Address Table Size | 32000 entries |
| Power Over Ethernet (PoE) | UPOE |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
Networking
