All stock codes associated to this product
4752224002693, RB4011iGS+5HacQ2HnDIN, RB4011iGS+5HacQ2HnD-IN
Mikrotik RB4011iGS+5HacQ2HnD-IN 4x 1,4 GHz, 10x Gigabit LAN SFP+ L5 WiFi Desktop Case
RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!
The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.
RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.
We have two versions available.
RB4011iGS+5HacQ2HnD-IN-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
RB4011iGS+5HacQ2HnD-IN (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Note: Passive DAC (MikroTik S+DA0001/S+DA0003) are not supported.
Specifications:
Product code: RB4011iGS+5HacQ2HnD-IN
Architecture: ARM 32bit
CPU: AL21400
CPU core count: 4
CPU nominal frequency: 1.4 GHz
Dimensions: 228 x 120 x 30 mm
RouterOS licence: 5
Operating System: RouterOS
Size of RAM: 1 GB
Storage size: 512 MB
Storage type: NAND
MTBF: Approximately 200'000 hours at 25C
Tested ambient temperature: -40C to 45C
IPsec hardware acceleration: Yes
Wireless capabilities:
Wireless 5 GHz Max data rate: 1733 Mbit/s
Wireless 5 GHz number of chains: 4
Wireless 5 GHz standards: 802.11a/n/ac
Antenna gain dBi for 5 GHz: 3
Wireless 5 GHz chip model: QCA9984
Wireless 5 GHz generation: Wi-Fi 5
Wireless 2.4 GHz Max data rate: 300 Mbit/s
Wireless 2.4 GHz number of chains: 2
Wireless 2.4 GHz standards: 802.11b/g/n
Antenna gain dBi for 2.4 GHz: 3
Wireless 2.4 GHz chip model: R11e-2HnD
Wireless 2.4 GHz generation: Wi-Fi 4
AC speed: AC2000
Ethernet:
10/100/1000 Ethernet ports: 10
Fibre:
SFP+ ports: 1
Peripherals:
MiniPCI-e slots: 1
Serial console port: RJ45
Powering:
Number of DC inputs: 2 (DC jack, PoE-IN)
DC jack input Voltage: 12-57 V
Max power consumption: 44 W
Max power consumption without attachments: 23 W
Cooling type: Passive
PoE in: Passive PoE
PoE in input Voltage: 18-57 V
PoE-out:
PoE-out ports: Ether10
PoE out: Passive PoE up to 57V
Max out per port output (input 18-30 V): 600 mA
Max out per port output (input 30-57 V): 420 mA
Max total out (A): 600 mA
Certification & Approvals:
Certification: CE, FCC, IC, EAC, ROHS
IP: IP20
Other:
PCB temperature monitor: Yes
Voltage Monitor: Yes
Wireless specifications:
5 GHz Transmit (dBm) Receive Sensitivity
6MBit/s 33 -96
54MBit/s 29 -81
MCS0 33 -96
MCS7 28 -77
MCS9 26 -72
2.4 GHz Transmit (dBm) Receive Sensitivity
1MBit/s 28 -100
11MBit/s 28 -94
6MBit/s 29 -96
54MBit/s 25 -80
MCS0 26 -96
MCS7 24 -79
Networking
