This SFP (mini-GBIC) transceiver module is designed for use with Cisco network equipment and is equivalent to Cisco part number GLC-ZX-SM. This transceiver is built to meet or exceed the specifications of the OEM and to comply with Multi-Source Agreement (MSA) standards. This product is 1 % functionally tested, and compatibility is guaranteed. The transceiver is a hot-swappable input/output device which allows a Gigabit Ethernet port to link with a fiber optic network. OEM specific configuration data is loaded on to the EEPROM of the transceiver at the factory, allowing this transceiver to initialize and perform identically to an OEM transceiver. This transceiver may be mixed and deployed with other OEM or third party transceivers and will deliver seamless network performance.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco Systems, Inc. This product is not certified or endorsed by Cisco Systems

* Form Factor: SFP
* Device Type: Transceiver module
* Interface (Bus) Type: Plug-in module
* Connectivity Technology: Wired
* Application: 1000BASE-ZX
* Data Transfer Rate: 1Gbps
* Wavelength: 1550nm
* Max Distance: 70Km
* Fiber Type: SMF
* Connector: Duplex LC
* DDM: Without DDM
* Operating Temperature: 0~70 Cs

* Hot Pluggable

* Low power consumption

* Compliant with MSA Specifications

* All-metal housing for superior EMI performance

* Cost effective solution, enables higher port densities and greater bandwidth

The Serveredge Gigabit Media Converter SED-1000MSC(550m) allows you to transparently connect your Gigabit Copper cabling system (10Base-T, 100Base-TX or 1000Base-T) with the fibre optic cabling system(1000Base-FX). This media converter provides a long distance connection between legacy 10BaseT, 100BaseTX networks and the 1000Base Gigabit Ethernet networks.The SED-1000MSC(550m) incorporates advances features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fibre Fault Alert &loop back.

This Unit can be used as a standalone unit or as a slide-in module in a Media

Converter Chassis.

* PERFORMANCE
Latency:< 4.2 s (LIFO)
Throughput @ 100Base:148,810 pps (64-byte packets)Throughput @ 1000Base:1,488,110 pps (64-byte packets)


FIBER INTERFACE, MULTIMODE MODELS
Type:Laser Diode
Wavelength:850nm nominal
Maximum Output Power:- 4.0 dBm
Minimum Output Power:- 9.5 dBm
Sensitivity:-13.5 dBm
Maximum Input Power:- 13.5 dBm
Link Power Budget:4.0 dB

PHYSICAL CHARACTERISTICS
Case dimensions:110mm x 81mm x 23mm
Weight:150 grams

ENVIRONMENTAL CHARACTERISTICS
Operating Temperature:32F ~ 104F (0C ~ 40C)
Storage Temperature:-13F ~ 158F (-25C ~ 70C)
Relative Humidity:10 ~ 90%, non-condensing

POWER
External power adapter:12 Volts DC; 600 mA
Power Consumption:5 Watts Maximum

* Built-In Twisted-Pair Port 10/100/1000 Switch

* Auto-Negotiation RJ45 Connector with Auto-MDIX

* SC, ST, MTRJ or LC Connector

* LEDs for Functions, Links &Activity

* Link Fault Signaling For Use with Managed Switches

* 1024 Mac Address Capacity

* Store and Forward Architecture

* Singlemode Spans up to 12 Km

* Wall or Chassis Mountable

* Compliant to FCC part 15 Class A, CE Mark, CTick

* Warranty: 2 Years Manufacturers Warranty