Input features and characteristics

• Number of adjustable logic threshold groups: 2
• Adjustable logic levels for each group: 1.2V, 1.5V, 1.8V, 2.8V, 3.3V to 5V
• Number of integrated receivers for RS232 bus: 5
• Number of integrated receivers for LIN bus: 5
• Number of integrated differential lines receivers: 2 (can used for CAN, RS485, etc.)
• Activity LED integrated to ScanaPLUS device quickly indicates logic change on any line
• Input operating range 35V
• Absolute maximum input range 50V
• Input impedance 100K || 5pF

Trigger options

• Pre-Trigger data display: 0% to 100% (allows to focus on post or pre-trigger data).
• Trigger modes: Rising edge, Falling edge, Logic change on a specific channel, logic change on any channel.

Capturing and analyzing signals

With the Scanalogic-2 logic analyzer, it has never been easier to capture streams of logic signals and analyze them using it's powerful features:

• Serial protocols sampling, decoding, debugging and analysis (like UART, SPI, CAN, LIN, I2C, 1-Wire, Manchester, maple bus…)
• Analysis of PWM signals, their frequencies and envelopes (Using the Fourier analysis feature).
• Monitor logic changes on digital signal lines.
• Store the captured data on files, to send them over the Internet to other users or for later playback!
• Captures images of the signals with all the timings, decoded data and markers.
• The Dual View features allows you can easily visually compare different data captures.

Generating data

Generating your own data

• Generate all kind of PWM (pulse width modulation) signals to control motors drivers, RGB LEDs or other devices.
• Generate all kinds of FM (frequency modulation) signals. Can be used to test speakers or for ultrasound detection systems testing.
• Generate Serial data and pulses sequences to test your equipment/project using a very user friendly syntax

Playing back captured data

• Record serial data and play it back, as simply as you would record & playback a speech!
• Using the “mixed modeâ€�, you can generate serial data on one channel (like UART), and record the response on another channels, all at the same time!
• This allows you to test your system in depth in a matter of minutes!

Typical applications

• Analysis and debugging of digital electronics circuits
• Serial protocol decoding andanalysis(UART, I2C, SPI, CAN, 1-WIRE, LIN, Manchester,)
• Capturing signals over RS485 and CAN bus differential lines directly
• Digital PWM and FM signals analysis (using the FFT feature)
• Precise frequency and timing measurements (based on a 20 MHz time-base)
• Wave forms, serial signals and bit stream generation.

Scanalogic-2 Compared to other devices

Wondering how ScanaPLUS compares to other Logic Anlaysers already in the market?

• It’s one of the simplest devices to use of its class, easily mastered by beginners and professionals.
• The ScanaStudio PC software features all the smooth scrolling and navigation options you would expect from any professional software.
• It introduces a new useful feature, that we called the mixed mode, allowing you to generate/playback digital signals, while recording the response on other channels, all at the same time!
• It Provides computer-independent performances and timings. SCANALOGIC 2 provides a firm 20MSPS based on an on-device quartz oscillator.
• Sampling rate will never be compromised by the performance of your computer!
• We have put a lot of efforts to keep this product affordable for most students and hobbyists without compromise for the quality of the device, it's probes or the software.
• The best value for money in it's class