HP 501 Wireless Client Bridge
(J9835A)
 
Overview
 
Devices with no native wireless support can be easily integrated into a wireless LAN (WLAN) using the HP 501 Wireless Client Bridge. The HP 501 Wireless Client Bridge can bridge up to 15 Ethernet client device running a legacy networking protocol to the WLAN, extending wireless network access to a wide range of protocols.
 
An integrated serial to TCP/IP converter enables a RS-232 asynchronous terminal device to communicate with a compatible station on the network. Strong enterprise-class layered security features, including an IEEE 802.1X supplicant, protect the network from intrusions.
 
Hardware-accelerated encryption provides high performance when using WPA2/AES security. It enables organizations to unwire a broad range of computing devices and realize the benefits of mobility.
 
Electronic cash registers, scales, servers, printers, medical equipment, manufacturing machinery and other devices can be deployed in any location where a WLAN signal is available, eliminating the time and expense of installing Ethernet cable for network access. The HP 501 Wireless Client Bridge integrates into the HP Mobility System and it is interoperable with any IEEE 802.11b/g/n or 802.11a/n/ac WLAN network infrastructure from HP or any other vendor.       
 
Features
 
Quality of Service (QoS)
 
Network management: - SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618). - Embedded HTML management tool with secure access. - Scheduled configuration and firmware upgrades via network management station.
 
Diagnostic: - RSSI logging. - Email alert tool.
 
QoS: - supports DSCP and WMM.
 
Connectivity
 
IEEE 802.3af Power over Ethernet (PoE) support: - simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each client bridge.
 
Auto-MDIX: - provides automatic adjustments for straight-through or crossover cables on all 10/100/1000 ports.
 
IEEE 802.11h International Telecommunication Union (ITU) compliant: - automatically selects the channel based on the access point it associates to and avoids Dynamic Frequency Selection (DFS) issues by following the access point to a clear channel.
 
Mobility
 
Anywhere, anytime wireless coverage: - provides single IEEE 802.11a/b/g/n/ac radio client bridge. - offers radio software-selectable configuration of frequency bands. - utilizes IEEE 802.3af PoE or local power supply.
 
Interoperability: - meets Wi-Fi Alliance Certifications, including IEEE 802.11a/b/g/n/ac and WPA2, to help ensure multivendor interoperability .
 
Supported devices: - support Windows-based PCs equipped with Ethernet cards;point-of-sale devices, scales, network printers, thin clients, Mac/Apple machines, Linux/Unix workstations, Ethernet-enabled appliances, medical
equipment, manufacturing machinery and/or mix of all devices listed. - connects RS232 asynchronous terminal devices to the wireless network.
 
Multiple devices: connects up to 15 Ethernet-enabled devices via a multiport switch
 
Security
 
IEEE 802.1X support: - provides user authentication with support for Extensible Authentication Protocol (EAP) TLS and PEAP with choice of AES, TKIP, and WEP encryption for protecting wireless traffic between authenticated
clients and the access point.
 
Choice of IEEE WPA2, WPA or WEP: - robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic.
 
Specifications
 
Ports
 
1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);Duplex: 10BASE-T/100BASE-TX: half or full
1000BASE-T: full only
1 RS-232C serial console port
Included
 
Radio
Single radio (802.11 a/b/g/n/ac)
 
Antenna
Three RP-SMA; 2 dBi dual-band omnidirectional; 3 external antennas
 
Power and operating requirements
 
Power consumption
9 W (maximum)
 
Operating temperature range
0 to 50°C
 
Operating humidity range
5 to 95% (noncondensing)
 
Dimensions and weight
 
Minimum dimensions (W x D x H)
13.97 x 3.3 x 12.7 cm
 
Weight
0.91 kg
 
What's included
 
What's in the box
(1) HP 501 Wireless Client Bridge Series; (3) 2dBi Dipole antennas; (1) Wall/table mount; (1) Quick Start document
 
Warranty
Lifetime, advance replacement, next business day, phone support, software releases

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (HP) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

People who purchased this product also purchased

No related products found.

 
L7: 1 | TM: 1 | LM: 1 | TY: 31 | T: 857

Secure Online Shopping

We accept the following with No surcharge on VISA, Mastercard and Paypal!
Techbuy Pty Ltd 2000 - 2019 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.