CPU |
1. AMD Socket AM5,
support for: AMD Ryzen 7000 Series Processors |
|
(Please refer "CPU
Support List" for more information.) |
Chipset |
1. AMD
B650 |
Memory |
1. Support for DDR5
6666(OC) / 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) / 5600(OC) / 5200 /
4800 / 4400 MT/s memory modules |
|
2. 4 x DDR5 DIMM
sockets supporting up to 128 GB (32 GB single DIMM capacity) of system
memory |
|
3. Dual channel memory
architecture |
|
4. Support for non-ECC
Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
5. Support for AMD
EXtended Profiles for Overclocking (AMD EXPO) and Extreme Memory Profile
(XMP) memory modules |
|
(Please refer "Memory
Support List" for more information.) |
Onboard
Graphics |
Integrated Graphics
Processor: |
|
1. 1 x DisplayPort,
supporting a maximum resolution of 3840x2160@144 Hz |
|
* Support for
DisplayPort 1.4 version and HDR. |
|
2. 1 x HDMI port,
supporting a maximum resolution of 4096x2160@60 Hz |
|
* Support for HDMI 2.1
version and HDCP 2.3. |
|
** Support native HDMI
2.1 TMDS compatible ports. |
|
(Graphics
specifications may vary depending on CPU support.) |
Audio |
1. RealtekAudio
CODEC |
|
2. High Definition
Audio |
|
3.
2/4/5.1/7.1-channel |
|
* You can change the
functionality of an audio jack using the audio software. To configure
7.1-channel audio, access the audio software for audio
settings. |
|
4. Support for S/PDIF
Out |
LAN |
1. Realtek2.5GbE LAN
chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless
Communication module |
AMD Wi-Fi 6E RZ616
(MT7922A22M) (For PCB rev. 1.0) |
|
1. WIFI a, b, g, n, ac,
ax, supporting 2.4/5/6 GHz carrier frequency bands |
|
2. BLUETOOTH
5.2 |
|
3. Support for 11ax
160MHz wireless standard and up to 2.4 Gbps data rate |
|
IntelWi-Fi 6E AX210
(For PCB rev. 1.1) |
|
1. WIFI a, b, g, n, ac,
ax, supporting 2.4/5/6 GHz carrier frequency bands |
|
2. BLUETOOTH
5.3 |
|
3. Support for 11ax
160MHz wireless standard and up to 2.4 Gbps data rate |
|
(Actual data rate may
vary depending on environment and equipment.) |
Expansion
Slots |
CPU: |
|
1. 1 x PCI Express x16
slot, supporting PCIe 4.0 and running at x16
(PCIEX16) |
|
* For optimum
performance, if only one PCI Express graphics card is to be installed, be
sure to install it in the PCIEX16 slot. |
|
Chipset: |
|
1. 1 x PCI Express x16
slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
Storage
Interface |
CPU: |
|
1. 1 x M.2 connector
(Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD support)
(M2A_CPU) |
|
* Actual support may
vary by CPU. |
|
2. 1 x M.2 connector
(Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support)
(M2B_CPU) |
|
Chipset: |
|
1. 4 x SATA 6Gb/s
connectors |
|
RAID 0, RAID 1, and
RAID 10 support for NVMe SSD storage devices |
|
RAID 0, RAID 1, and
RAID 10 support for SATA storage devices |
USB |
CPU: |
|
1. 1 x USB Type-Cport
on the back panel, with USB 3.2 Gen 2 support |
|
2. 2 x USB 3.2 Gen 2
Type-A ports (red) on the back panel |
|
CPU + USB 2.0
Hub: |
|
1. 4 x USB 2.0/1.1
ports on the back panel |
|
Chipset: |
|
1. 1 x USB Type-Cport
with USB 3.2 Gen 2x2 support, available through the internal USB
header |
|
2. 3 x USB 3.2 Gen 1
ports (1 port on the back panel, 2 ports available through the internal
USB header) |
|
3. 4 x USB 2.0/1.1
ports available through the internal USB headers |
|
Chipset+USB 3.2 Gen 1
Hub: |
|
1. 4 x USB 3.2 Gen 1
ports on the back pane |
Internal I/O
Connectors |
1. 1 x 24-pin ATX main
power connector |
|
2. 1 x 8-pin ATX 12V
power connector |
|
3. 1 x CPU fan
header |
|
4. 1 x water cooling
CPU fan header |
|
5. 3 x system fan
headers |
|
6. 1 x system fan/water
cooling pump header |
|
7. 2 x addressable LED
strip headers |
|
8. 2 x RGB LED strip
headers |
|
9. 1 x CPU cooler LED
strip/RGB LED strip header |
|
10. 2 x M.2 Socket 3
connectors |
|
11. 4 x SATA 6Gb/s
connectors |
|
12. 1 x front panel
header |
|
13. 1 x front panel
audio header |
|
14. 1 x USB
Type-Cheader, with USB 3.2 Gen 2x2 support |
|
15. 1 x USB 3.2 Gen 1
header |
|
16. 2 x USB 2.0/1.1
headers |
|
17. 1 x serial port
header |
|
18. 1 x THB_U4 add-in
card connector |
|
19. 1 x Trusted
Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module
only) |
|
20. 1 x reset
button |
|
21. 1 x reset
jumper |
|
22. 1 x Clear CMOS
jumper |
Back Panel
Connectors |
1. 1 x Q-Flash Plus
button |
|
2. 2 x SMA antenna
connectors (2T2R) |
|
3. 1 x
DisplayPort |
|
4. 1 x HDMI
port |
|
5. 1 x USB Type-Cport,
with USB 3.2 Gen 2 support |
|
6. 2 x USB 3.2 Gen 2
Type-A ports (red) |
|
7. 5 x USB 3.2 Gen 1
ports |
|
8. 4 x USB 2.0/1.1
ports |
|
9. 1 x RJ-45
port |
|
10. 1 x optical S/PDIF
Out connector |
|
11. 2 x audio
jacks |
I/O
Controller |
1. iTEI/O Controller
Chip |
H/W
Monitoring |
1. Voltage
detection |
|
2. Temperature
detection |
|
3. Fan speed
detection |
|
4. Water cooling flow
rate detection |
|
5. Fan fail
warning |
|
6. Fan speed
control |
|
* Whether the fan
(pump) speed control function is supported will depend on the fan(pump)
you install. |
BIOS |
1. 1 x 256 Mbit
flash |
|
2. Use of licensed AMI
UEFI BIOS |
|
3. PnP 1.0a, DMI 2.7,
WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique
Features |
1. Support for GIGABYTE
Control Center (GCC) |
|
* Available
applications in GCC may vary by motherboard model. Supported functions of
each application may also vary depending on motherboard
specifications. |
|
2. Support for
Q-Flash |
|
3. Support for Q-Flash
Plus |
Bundled
Software |
1. NortonInternet
Security (OEM version) |
|
2. LAN bandwidth
management software |
Operating
System |
1. Support for Windows
11 64-bit |
|
2. Support for Windows
10 64-bit |
Form
Factor |
1. Micro ATX Form
Factor; 24.4cm x
24.4cm |