|
CPU |
1.
LGA1700 socket: Support for the 13th and 12th Generation Intel Core,
Pentium Gold and Celeron Processors |
|
2.
L3 cache varies with CPU |
|
(Please
refer "CPU Support List" for more
information.) |
|
Chipset |
1.
Intel Z790 Express Chipset |
|
Memory |
1.
Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.)
/6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) /
5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory
modules |
|
2.
4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory |
|
3.
Dual channel memory architecture |
|
4.
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in
non-ECC mode) |
|
5.
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
modules |
|
6.
Support for Extreme Memory Profile (XMP) memory
modules |
|
(Please
refer "Memory Support List" for more
information.) |
|
Onboard
Graphics |
Integrated
Graphics Processor-Intel HD Graphics
support: |
|
1.
1 x HDMI port, supporting a maximum resolution of 4096x2160@60
Hz |
|
*
Support for HDMI 2.0 version and HDCP 2.3. |
|
2.
1 x DisplayPort, supporting a maximum resolution of
4096x2304@60 |
|
*
Support for DisplayPort 1.2 version and HDCP
2.3 |
|
(Graphics
specifications may vary depending on CPU
support.) |
|
Audio |
1.
Realtek Audio CODEC |
|
2.
High Definition Audio |
|
3.
2/4/5.1/7.1-channel |
|
*
You can change the functionality of an audio jack using the audio
software. To configure 7.1-channel audio, access the audio software for
audio settings. |
|
4.
Support for S/PDIF Out |
|
LAN |
1.
Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100
Mbps) |
|
Wireless
Communication module |
Intel Wi-Fi
6E AX211 |
|
1.
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency
bands |
|
2.
BLUETOOTH 5.3 |
|
3.
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data
rate |
|
*
Actual data rate may vary depending on environment and
equipment. |
|
Expansion
Slots |
CPU: |
|
1.
1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16
(PCIEX16) |
|
*
For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16
slot. |
|
Chipset: |
|
1.
1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4
(PCIEX4_1) |
|
2.
1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4
(PCIEX4_2) |
|
Storage
Interface |
CPU: |
|
1.
1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD
support) (M2A_CPU) |
|
Chipset: |
|
1.
2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD
support) (M2P_SB, M2Q_SB) |
|
2.
1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4
SSD support) (M2M_SB) |
|
3.
6 x SATA 6Gb/s connectors |
|
RAID
0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage
devices |
|
RAID
0, RAID 1, RAID 5, and RAID 10 support for SATA storage
devices |
|
*
Refer to "2-8 Internal Connectors," for the installation notices for the
M.2 and SATA connectors. |
|
USB |
Chipset: |
|
1.
1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2
support |
|
2.
1 x USB Type-C port with USB 3.2 Gen 2 support, available through the
internal USB header |
|
3.
2 x USB 3.2 Gen 2 Type-A ports (red) on the back
panel |
|
4.
5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available
through the internal USB header) |
|
Chipset+2
USB 2.0 Hubs: |
|
1.
8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available
through the internal USB headers) |
|
Internal
I/O Connectors |
1.
1 x 24-pin ATX main power connector |
|
2.
2 x 8-pin ATX 12V power connectors |
|
3.
1 x CPU fan header |
|
4.
1 x water cooling CPU fan header |
|
5.
3 x system fan headers |
|
6.
1 x system fan/water cooling pump header |
|
7.
2 x addressable LED strip headers |
|
8.
2 x RGB LED strip headers |
|
9.
4 x M.2 Socket 3 connectors |
|
10.
6 x SATA 6Gb/s connectors |
|
11.
1 x front panel header |
|
12.
1 x front panel audio header |
|
13.
1 x USB Type-C header, with USB 3.2 Gen 2
support |
|
14.
1 x USB 3.2 Gen 1 header |
|
15.
2 x USB 2.0/1.1 headers |
|
16.
2 x Thunderbolt add-in card connectors |
|
17.
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only) |
|
18.
1 x reset button |
|
19.
1 x Q-Flash Plus button |
|
20.
1 x Clear CMOS button |
|
21.
1 x reset jumper |
|
22.
1 x Clear CMOS jumper |
|
Back
Panel Connectors |
1.
1 x USB Type-C port, with USB 3.2 Gen 2x2
support |
|
2.
2 x USB 3.2 Gen 2 Type-A ports (red) |
|
3.
3 x USB 3.2 Gen 1 ports |
|
4.
4 x USB 2.0/1.1 ports |
|
5.
2 x SMA antenna connectors (2T2R) |
|
6.
1 x HDMI 2.0 port |
|
7.
1 x DisplayPort |
|
8.
1 x RJ-45 port |
|
9.
1 x optical S/PDIF Out connector |
|
10.
2 x audio jacks |
|
I/O
Controller |
1.
iTE I/O Controller Chip |
|
H/W
Monitoring |
1.
Voltage detection |
|
2.
Temperature detection |
|
3.
Fan speed detection |
|
4.
Water cooling flow rate detection |
|
5.
Fan fail warning |
|
6.
Fan speed control |
|
*
Whether the fan (pump) speed control function is supported will depend on
the fan (pump) you install. |
|
BIOS |
1.
1 x 256 Mbit flash |
|
2.
Use of licensed AMI UEFI BIOS |
|
3.
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI
5.0 |
|
Unique
Features |
1.
Support for GIGABYTE Control Center (GCC) |
|
*
Available applications in GCC may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard
specifications. |
|
2.
Support for Q-Flash |
|
3.
Support for Q-Flash Plus |
|
4.
Support for Smart Backup |
|
Bundled
Software |
1.
Norton Internet Security (OEM version) |
|
2.
LAN bandwidth management software |
|
Operating
System |
1.
Support for Windows 11 64-bit |
|
2.
Support for Windows 10 64-bit |
|
Form
Factor |
1.
ATX Form Factor; 30.5cm x
24.4cm |
