All stock codes associated to this product
SG5428XMPP, NWTL-SG5428XMPP, NWTLSG5428XMPP, 8885020626445
Management features |
---|
ARP inspection | Yes |
Switch layer | L3 |
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
Multicast support | Yes |
Cloud-managed | Yes |
Ports & interfaces |
---|
SFP+ module slots quantity | 4 |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Installed SFP modules quantity | 0 |
Installed SFP+ modules quantity | 0 |
Console port | RJ-45 |
Gigabit Ethernet (copper) ports quantity | 24 |
USB 2.0 ports quantity | 1 |
USB Type-C ports quantity | 1 |
Network |
---|
Networking standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt |
Number of VLANs | 4000 |
VLAN support | Yes |
Port mirroring | Yes |
Link aggregation | Yes |
Broadcast storm control | Yes |
10G support | Yes |
Virtual LAN features | Voice VLAN, MAC address-based VLAN, Private VLAN, Protocol-based VLAN |
IGMP snooping | Yes |
Data transmission |
---|
Jumbo frames | 9000 |
MAC address table | 16000 entries |
Switching capacity | 128 Gbit/s |
Store-and-forward | Yes |
Jumbo frames support | Yes |
Packet buffer memory | 12 MB |
Forwarding rate | 95.23 Mpps |
Number of VLANs | 4000 |
Security |
---|
IP-MAC-Port binding | Yes |
Static port security | Yes |
SSH/SSL support | Yes |
Security algorithms | SNMP, SNMPv2, SNMPv3 |
MAC address filtering | Yes |
IGMP snooping | Yes |
Password protection | Yes |
DHCP features | DHCP relay, DHCP server |
Multicast features |
---|
Multicast support | Yes |
Design |
---|
Rack mounting | Yes |
Stackable | Yes |
Product colour | Black |
LED indicators | Yes |
Number of fans | 3 fan(s) |
Performance |
---|
Physical stacking (units) | 4 |
Processor frequency | 1200 MHz |
Memory type | DRAM |
Internal memory | 2000 MB |
Flash memory | 512 MB |
Firmware upgradeable | Yes |
Mean time between failures (MTBF) | 292.83 h |
Processor manufacturer | ARM |
Telnet | Yes |
Built-in processor | Yes |
Stackable | Yes |
Packet buffer memory | 12 MB |
Power |
---|
Power consumption (max) | 587.7 W |
Power supply included | Yes |
Surge protection voltage | 6 kV |
AC input voltage | 100 - 240 V |
AC input frequency | 50/60 Hz |
Surge protection | Yes |
Power source | AC/PoE |
Power over Ethernet (PoE) |
---|
Power over Ethernet (PoE) power per port | 90 W |
Power over Ethernet (PoE) | Yes |
Power over Ethernet plus (PoE+) ports quantity | 16 |
Total Power over Ethernet (PoE) budget | 500 W |
Power over Ethernet (PoE) type supported | PoE+, PoE++ (4PPoE) |
Power over Ethernet 4PPoE (PoE++) ports quantity | 8 |
Other features |
---|
Management level | 4 |
Bandwidth | 64 Gbit/s |
Operational conditions |
---|
Operating temperature (T-T) | -5 - 45 °C |
Storage temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 10 - 90% |
Storage relative humidity (H-H) | 5 - 90% |
Virtual LAN features |
---|
Number of VLANs | 4000 |
VLAN support | Yes |
Virtual LAN features | Voice VLAN, MAC address-based VLAN, Private VLAN, Protocol-based VLAN |
Weight & dimensions |
---|
Width | 440 mm |
Depth | 330 mm |
Height | 44 mm |
Packaging content |
---|
Rack mount kit | Yes |
Quick start guide | Yes |
Cables included | AC |
Technical details |
---|
Telnet | Yes |
Compliance certificates | Federal Communications Commission (FCC), RoHS, CE |
Certificates |
---|
Compliance certificates | Federal Communications Commission (FCC), RoHS, CE |
Packaging data |
---|
Rack mount kit | Yes |
Quick start guide | Yes |
Cables included | AC |
What This Product DoesOmada SG5428XMPP is a dependable entry-level L3 managed PoE++ switch tailored for the access layer, featuring L3 routing, fast 10 Gbps wired speeds, and stacking options. It boasts a 500W PoE budget,* 24× gigabit RJ45 ports (8× PoE++, 16× PoE+), 4× 10 Gbps SFP+ slots, physical stacking ability, and centralized management. Integrated with strong security and extensive management features, the SG5428XMPP offers a reliable networking solution for SMEs, and ISPs.
IEEE 802.3af/at/bt-compliant Power over Ethernet8× IEEE 802.3af/at/bt-compliant and 16× IEEE 802.3af/at-compliant PoE ports supply up to 500W total power to 802.3af, 802.3at, and 802.3bt devices.* Set up wireless access points, surveillance cameras, IP phones, and other PoE devices quickly and easily, without the hassle and cost of installing power cabling. Perpetual PoE ensures an uninterrupted power supply to connected devices even during switch reboots. Additionally, the switch retains PoE power settings across reboots, thanks to fast PoE functionality.
High-speed Connectivity and Powerful Stacking24× gigabit RJ45 ports and 4× 10 Gbps SFP+ slots provide up to 128 Gbps switching capacity per unit. Up to 4 units of physical stacking empower the networking structure with built-in redundancy and performance.
Abundant Layer 3 CapabilitiesComes with abundant Layer 3 routing protocols that support a scalable network. Static Routing, RIP, OSPF, DHCP Server, and DHCP Relay are supported.
Highly AvailableERPS (Ethernet Ring Protection Switching) ensures rapid protection and recovery in ring topologies, which is essential for maintaining network uptime in medium business environments.
Enhanced Security FunctionsDefend against a range of network threats with ACL support (IPv4 & IPv6), Dynamic ARP Inspection, IEEE 802.1X, MAB, Port Security, and Secure Shell.
Omada SDNIntegration into the Omada system brings centralized cloud management and a series of management features such as Zero-Touch Provisioning (ZTP).† The Omada Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and routers, providing 100% centralized cloud management–all controlled from a single interface.
Apart from the ability to be centrally managed via the web or the Omada app, SG5428XMPP is also easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enable the switch to be polled for valuable status information and to send traps for abnormal events.