All stock codes associated to this product
SRT5KRMXLIASU, SRT5KRMXLI-ASU, 4735533
APC SRT5KRMXLI Smart-UPS SRT 5000VA RM 230V
Overview
- High density, double-conversion on-line power protection with scalable
runtime
- Includes: Documentation CD, Installation guide, Rack Mounting brackets,
Rack mounting hardware, Rack Mounting support rails, Temperature Probe,
Warranty card, Web/SNMP ...
Key Features
Output power
capacity |
4.5kWatts
/ 5.0kVA |
Rack Height
|
3U |
Output Connections
|
(6) IEC 320 C13 (Battery
Backup) |
|
(4) IEC 320 C19 (Battery
Backup) |
|
(2) IEC Jumpers (Battery
Backup) |
Nominal Output
Voltage |
230V |
Nominal Input
Voltage |
230V |
Input Connections
|
Hard Wire 3 wire
(1PH+N+G) |
- APC Smart-UPS SRT 5000VA RM 230V
- High density, double-conversion on-line power protection with scalable
runtime
- Includes: Documentation CD, Installation guide, Rack Mounting brackets,
Rack mounting hardware, Rack Mounting support rails, Temperature Probe,
Warranty card, Web/SNMP Management Card
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT
connection
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive
maintenance
ECO Mode
Operating mode that by-passes unused electrical components in good power
conditions to achieve high operating efficiency without sacrificing
protection
Green mode
Patent-pending operating mode that bypasses unused electrical components in
good power conditions to achieve very high operating efficiency without
sacrificing any protection.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters
and alarms.
Smart-UPS On-Line Features & Benefits
Marketing Features
Avoids costly power problems by keeping your IT equipment and data protected
and available.
Network grade power conditioning protects from damaging surges and disruptive
noise. The double conversion architecture provides tight voltage regulation,
frequency regulation ,and zero transfer time to battery during power
events.
Low operating and maintenance costs with proven reliability and intelligent
battery management.
Intelligent battery management, pioneered by APC, maximizes battery
performance and life through intelligent, precision temperature compensated
charging. Automatic self tests insure battery reliability and warn customers in
advance of battery replacement. Convenient, easy to connect, hot-swappable
battery modules provide battery replacement without powering
down.
Save time with easy and convenient remote/network
accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute Software
for convenient monitoring and control, safe operating system shutdown, and
innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of
a leader
Provides pure sine wave output which is recommended by server manufacturers
using active power factor corrected (PFC) power supplies. Safety agency tested
and approved means that you can deploy Smart-UPS with confidence that they meet
or exceed the industrys most rigorous standards.
Adaptability
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to
rack-mount environment.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to
the UPS.
Manageability
Serial connectivity
Provides management of the UPS via a serial port.
SmartSlot
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual
indicators.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure
Manager.
Availability
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are
being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility
power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery
temperature.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power
overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent,
precision charging.
Serviceability
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to
be replaced.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component
replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power
conditions
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and
replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator
power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and
cabling.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on
Wall Tap SKUs)
Cold-start capable
Provides temporary battery power when the utility power is
out.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and
voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power
disturbances.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the
connected service provider equipment and within the specified
environment.
Specifications
Output |
|
Max Configurable Power
(Watts) |
4.5kWatts
/ 5.0kVA |
Output Voltage
Distortion |
Less than
2% |
Output Frequency (sync
to mains) |
50/60Hz +/- 3
Hz |
Other Output Voltages
|
220,
240 |
Load Crest Factor
|
3:01 |
Topology
|
Double Conversion
Online |
Waveform type
|
Sine
wave |
Bypass
|
Internal Bypass
(Automatic and Manual) |
Input |
|
Input frequency
|
40 - 70 Hz (auto
sensing) |
Input voltage range for
main operations |
160 -
275V |
Input voltage
adjustable range for mains operation |
100 - 275 (half
load)V |
Other Input Voltages
|
220,
240 |
Batteries &
Runtime |
|
Battery type
|
Maintenance-free sealed
Lead-Acid battery with suspended electrolyte :
leakproof |
Typical recharge time
|
1.5hour(s) |
Nominal Battery Voltage
|
192V |
Replacement Battery
|
APCRBC140 |
Expected Battery Life
(years) |
3 -
5 |
RBC Quantity
|
1 |
Extendable Run Time
|
1 |
Battery Volt-Amp-Hour
Capacity |
845 |
Extended Run Options
|
APC-Smart-UPS-SRT-5000VA-RM-230V |
Communications &
Management |
|
Interface Port(s)
|
RJ-45 10/100 Base-T,
RJ-45 Serial, Smart-Slot, USB |
Control panel
|
Multi-function LCD status
and control console |
Audible Alarm
|
Audible and visible
alarms prioritized by severity |
Emergency Power Off
(EPO) |
Yes |
Available SmartSlot
Interface Quantity |
1 |
Surge Protection and
Filtering |
|
Surge energy rating
|
480Joules |
Physical |
|
Maximum Height
|
130MM,
13.0CM |
Maximum Width
|
432MM,
43.2CM |
Maximum Depth
|
719MM,
71.94CM |
Net Weight
|
54.43KG |
Shipping weight
|
66.86KG |
Shipping Height
|
330MM,
33.0CM |
Shipping Width
|
610MM,
61.0CM |
Shipping Depth
|
960MM,
96.0CM |
Color
|
Black |
Units per Pallet
|
6 |
Environmental |
|
Operating Temperature
|
0 - 40
C |
Operating Relative
Humidity |
0 - 95 (non-condensing)
% |
Operating Elevation
|
0-3000meters |
Storage Temperature
|
-15 - 45
C |
Storage Relative
Humidity |
0 - 95 (non-condensing)
% |
Storage Elevation
|
0-15000meters |
Audible noise at 1
meter from surface of unit |
55.0dBA |
Online thermal
dissipation |
931.0BTU/hr |
Protection Class
|
IP
20 |
Conformance |
|
Approvals
|
CE, CE Mark, EAC, EN/IEC
62040-1, EN/IEC 62040-2, IRAM, RCM, VDE |
Standard warranty
|
3 years repair or replace
(excluding battery) and 2 years for battery |
Sustainable Offer
Status |
|
RoHS |
Compliant |
REACH
|
REACH: Contains
SVHCs |